eLB2H 24V controller, replacement for NORMSTAHL Magic 600/1000
451.00 zloty
- EUR: 105.90€
Controller power supply: 24V AC, Controller output voltage: 24 V DC, Maximum output power: 140 W Remote control frequency: 433.92 MHz, Remote control memory: 34, Supported remote controls: 2k433 4A433 4E433
- Supply voltage: 24V AC/DC
- Output voltage: 24 DC
- Built-in radio receiver: YES
- Supported gateway type: GARAGE DOOR
- Encoder support: YES
- Description
- Additional information
- Mark
- Opinions (0)
Description
eLB2H 24V controller, replacement for NORMSTAHL Magic 600/1000
eLB2 This is a controller for gate and garage drives using 24V DC motors with a power of up to 140W. Perfect for continuous operation. It can be used in housing estate parking lots, private properties and companies.
eLB2 can be used as a replacement for drivers NORMSTAHL MAGIC 600 and MAGIC 1000. Motor connector and external connectors in the eLB2 controller and NORMSTAHL MAGIC 600 and MAGIC 1000 are compatible. In case of such use, please read the service note for the eLB2 controller available on the manufacturer's website.
The drivers are available in two versions:
- eLB2H – works with almost all remote controls compatible with the KeeLoq® coding system
- eLB2E – works in KeeLoq® High Security mode and works with Eldrim remote controls
Characteristics
- Control using transmitters (up to 30) at 433.92MHz with Keeloq dynamically variable code.
- Bell button control.
- Virtual limit switches.
- Infrared barrier input – this is an additional security element that should be connected to the control. It increases the safety of use before the gate hits a vehicle, person or object in its view.
- Earlier automatic closing of the gate after passing the infrared barrier.
- Control with a manipulator located on the housing.
- Automatic closing function – automatically closes the gate after a specified time. This time is regulated by the automatic closing delay time. Photocells shorten the automatic closing time; after removing the obstacle from the range of the photocells, automatic closing occurs after 5 seconds.
- Residential function - facilitates entry-exit communication, ensuring that the gate will not close when another person activates the gate using a manual control button or remote control.
- Emergency closing and opening function - using the opening and closing keys, you can close or open the gate in an emergency, taking special care, as all security measures are disabled.
- Adjusting the overload force is an essential element of protection against crushing of elements located in the door opening, and additionally protects the engine and the entire drive mechanism of the gate against damage. The overload force is regulated by potentiometers marked: "VR1" Static and "VR2" Dynamic.
- Dynamic closing – allows the swing gate to be slammed shut.
- Traffic lights for gate movement or switching on the lighting with delayed switching off.
- Automatic overload setting.
- Automatic repeal after overload.
- Remote programming of eLB2E transmitters.
- Simple installation and programming procedure
|
Basic information |
|
|
Power supply: |
24V AC |
|
Power consumption in standby state: |
<25mA ac (without accessories) |
|
Power consumption at rest: |
<2W (without accessories) |
|
External dimensions with housing. (width x depth x height): |
150x180x98mm |
|
Level of security: |
IP53 |
|
Libra: |
280 g |
|
Executive elements |
|
|
actuator output (voltage / maximum power / built-in capacitor / quantity): |
24V DC / 140W / none / 1 |
|
power regulation: |
lack |
|
signal lamp output: |
relay 240VAC, max. 40W |
|
power output for accessories (photocells, etc.): |
24V DC, 0.5A |
|
input for photocells: |
type NC |
|
additional output: |
lack |
|
manual sequence control input OPEN/CLOSE: |
YEAH |
|
Functionality |
|
|
User Interface: |
DIP-SWITCH multiswitch and LEARN microswitch with LED |
|
possibility of turning off the internal signal lamp interrupter: |
Yes |
|
auto closing function: |
Yes |
|
Fast manipulator function: |
Yes |
|
open only function: |
Yes |
|
radio control: |
yes built-in on the PCB |
|
communication interface connector: |
yes USART |
|
manual control button connector on the housing: |
Yes |
|
optical strip status signaling: |
Yes |
|
Technical data |
|
|
Reception: |
60 m |
|
Transmission standard: |
Keeloq |
|
Working frequency: |
433.92MHz |
|
Supported remote controls: |
works with all transmitters compatible with the Keeloq transmission standard. |
|
Pilot memory: |
30 pilots |
|
Fuse type: |
1.6/230V (5x20mm) |
|
Operating temperature range: |
-20ºC +70ºC |
|
Working time: |
120 sec. |
|
Auto closing time: |
5s – 10mins |
|
Main properties |
|
|
|
Control using transmitters (up to 40) at 433.92MHz with Keeloq dynamically variable code. |
|
|
Bell button control. |
|
|
Automatic closing function. |
|
|
Neighborhood function. |
|
|
Wicket function. |
|
|
Possibility to install an infrared barrier. |
|
|
Earlier automatic closing of the gate after passing the infrared barrier. |
|
|
Traffic lights for gate movement or switching on the lighting with delayed switching off. |
|
|
Photocell testing function for increased safety. |
|
|
Simple installation and programming procedure |
|
Additional accessories |
|
| NOLOGO ZOOM Z2E photocells | |
| NOLOGO SNOD-1-230 warning lamp | |
| Remote control 2k433 | |
| Remote control 4A433 | |
| Remote control 4E433 |
Files to download:
Additional information
| Index | 05155 |
|---|---|
| Producer | |
| Producent code | |
| Libra | 1 |
| Supply voltage: | 24V AC/DC |
| Output voltage: | 24V DC |
| Built-in radio receiver: | YES |
| Supported gateway type: | garage door |
| Encoder support: | NO |
Mark
ELDRIM
Be the first to review "eLB2H 24V controller, replacement for NORMSTAHL Magic 600/1000"
also check
Available from 3 to 7 days
SKU:
Sommer SP 900 sliding gate drive, shaft 100 mm
- EUR: 715.94€
Opinions
There are no opinions about the product yet.