eLR-FAA2-H 2-channel radio receiver, FAAC equivalent, 433MHz FAAC FIX remote controls
99.00 zloty
- EUR: 22.82€
The eLR-FAA2 radio receiver has two-channel operation and allows you to remember up to 32 remote controls. The receiver can be connected to controllers that use a radio with a 5-point connector type MX-5145-5AH. An additional relay with a maximum load of 1A/30V is connected to the CH2 channel, the contacts of which are placed on the ARK connector marked as CH2. The second channel (CH2) can operate in monostable and bistable mode. The operating mode is changed using a switch located on the receiver board. To enable bistable mode, set the switch to the ON position. The eLR-FAA2 receiver only supports remote controls with a frequency of 433.92MHz
- Description
- Additional information
- Mark
- Opinions (0)
Description
Radio card eLRFAA2 cooperates with FAAC headquarters. It has two channels. Replaces the original FAAC receivers equipped with the MX-5145 connector: FIX LUX, RPE 433H, RP LC 433, RP2 LC 433 RP2 868 SLH, RP 868 SLH, XF 433 and other manufacturers: S-FIX, ELF2.
- eLRFAA2E works in the Keeloq® high security system and allows you to remember 32 eLdrim transmitters
- eLRFAA2H memory for 42 transmitters, works with almost all transmitters with the HCS system operating at a frequency of 433.92MHz
- Perfect superheterodyne receiver with double interference filtering
- Non-volatile memory of remote control transmitters
- Trouble-free installation in original FAAC control panels
- Simple learning and configuration procedure
- Operation in bistable and monostable mode for the CH2 channel
| Technical data: | eLRFAA2E | eLRFAA2H |
| Power supply: | from the control panel +12-24V/ac/dc |
| Maximum current consumption: | max 12mA/42mA with 24Vac power supply |
| Pilot memory: | 32 pcs. | 42 pcs. |
| Operating temperature range: | -20ºC +70ºC |
| External dimensions (width x depth x height): | 50 x 50 x 22 mm |
| Case: | no housing, installation via motherboard connector |
| Libra: | 18g |
| Output parameters: | |
| Open collector outputs (type, quantity, max. load): | OC, 2, 0.1A/30V DC (MX-5145 connector), 1x NO output 1A/30V AC (CH2 connector) |
| Output operating modes: | CH1 monostable(1s), CH2 monostable(1s) or bistable |
| Radio parameters: | |
| Radio module: | integrated, superheterodyne, ensuring high reliability, repeatability and immunity to radio interference |
| Transmission security: | Keeloq® | Keeloq® |
| Modulation type/frequency: | OOK / 433.92 MHz |
| Antenna input impedance: | 50 Ω |
| Antenna: | internal antenna, connector for connecting an external antenna |
| Functionality: | |
| User Interface: | simple installation of the device, learning and configuration procedure, based on one LED and one button |
| Remote Configuration: | possibility of assigning any button to the remote control |
| Possibility to erase the entire memory: |  Yes |
| Possibility of deleting a single remote control: |  NO |
| Possibility to enter the remote control without having to access the receiver buttons: | NO |
Files to download:
Additional information
| Index | 01138 |
|---|---|
| Producent code | eLR-FAA2-H |
| Producer | eLdrim |
| Libra | 0.2 |
Mark
ELDRIM
Be the first to review "eLR-FAA2-H 2-channel radio receiver, FAAC equivalent, 433MHz FAAC FIX remote controls"
also check
-
Gate control boards and control unitseLB9Ek – Controller for double-leaf gates 2x230V
539.00 zloty- EUR: 124.23€
-
-
Gate control boards and control unitseL13TH-24V – Double-leaf gate controller 24V 2x75W
425.00 zloty- EUR: 97.96€
-
Hormann Radio Road, Marantec Radio Roadradio receiver eLR2-868S 2-channel 230V Marantec, Hormann
180.00 zloty- EUR: 41.49€
Opinions
There are no opinions about the product yet.