HYBRID SOLAR SOLAR OFF-GRID ESB-10KW-48 MPPT 10XPV

Description

Home Off-Grid power plant.

The set consists of 10 panels monocrystalline power 430W EVERYONE, hybrid inverter ESB-10KW-48, DC/DC protection, insulation disconnector and complete wiring of length 25 meters ended with connectors Mc4.
Installation off-grid does not require applications and acceptance of the power plant.

Solar inverters of the ESB series are designed to build independent off-grid 230V power systems based on energy obtained from PV panels, energy networks and battery. Thanks to the modular design and flexible configuration, ESB inverters can work in UPS mode with battery charging from PV panels and/or energy network, they can also work in buffer systems powered only from PV panels and/or energy -supported from the network.
Output stable sinusoidal 230V power supply (220V, 240V) is perfect for supplying all electricity receivers, and the built -in start -up power steering system allows the supply of receivers with a high start -up current such as compressors in refrigerators and aggregates.
Inverter configuration and controlling it is available using an intuitive control panel that can be installed at a convenient place up to 20m from the inverter.
New in the ESB series inverters is also the ability to control the inverter using a smartphone and a mobile application replacing the control panel.

The most important feature of inverters is the possibility of building hybrid power systems without an external battery, which has a significant impact on the cost and reliability of the system and the profitability of the investment.

Set contains:
• 10 monocrystalline PV panels with power 430W
• Hybrid solar inverter ESB-10KW-48
• DC/DC protection PVP-10 700V/16A PVP
• DC/DC isolation switch for PV installations 32A / 1000VDC
• set of wires 25 meters with connectors
• Installation instructions

Inverter technical data:

Input parameters
• Nominal input voltage: 230 VAC
• Input voltage range: 90-280 VAC
• Work tension frequency: 50 Hz/60 Hz (automatic detection)

OUTPUT PARAMETERS
• Output voltage: 230 VAC
• Continuous power (power supply): 1000VA
• Continuous power (PV / AKU power supply): 5000W
• Efficiency: 93%
• Switching time: 15 ms
• The voltage at the output: pure sinusoid

BATTERY
• Battery voltage: 48 VDC
• Battery charging voltage: 54 VDC
• Battery overload protection: 63 VDC

LANDING
• Charging type: MPPT
• Maximum power of PV panels: 5000W
• MPPT work voltage range: 120-450 VDC
• Maximum voltage of the PV panel circuit: 500 VDC
• Maximum charging current from PV panels: 80 A
• Maximum charging current from the network: 60 A
• Maximum charging current: 80 A

DIMENSIONS WEIGHT
• Dimensions of the head x Sz. x height [mm]: 115 x 300 x 400
• Weight [kg]: 10
• EAN: 5903332566457

WORKING CONDITIONS
• Operating temperature: -10°C ~ +50°C
• Humidity: 5%-95% relative humidity (non-condensing)
• Protection degree (IP): IP21

Technical data
Photovoltaic panel Kingdom Solar KD-M410H-108 Half Cell 410W 10BB Mono
• Nominal power PMAX (W): 410
• PMAX maximum power tolerance: 0 ~ +5
• Maximum voltage VMP [V]: 31.22
• Current in nominal power LMP [A]: 13.06
• VOC [V] open circuit voltage: 37.34
• Short -circuit protection [A]: 25
• Short -circuit current [A]: 13.7
• Module performance [%]: 20.97
• Notc: 48 ° C (+-2)
• PMAX temperature factor: -0.36%/C
• VOC temperature factor: -0.28%/C
• ISC: +0.05%/c temperature coefficient
• Maximum work voltage: 1500VDC
• Operating temperature: -40 ° C +85 ° C
• Maximum feedback [A]: 25
• Load max. Load (snow / wind): 5400 PA / 2400 PA
• Cells: Mono 182 × 182 mm
• Links: 108 (54 × 2)
• Module dimensions [mm]: 1723 × 1133 × 35
• Weight [kg]: 21.5
• Glass: 3.2mm glass, tempered glass
• Connection box: IP68 with 3 bypass LEDs
• Cables: 4mm2, (+) 30cm, (-) 30cm
• CONNECTORS: MC4-Compatible
  

   

  Electrical device - install and operate in accordance with the requirements contained in the product card and installation instructions.