SMG FAAC 868 remote control replacement

Description

SMG FAAC 868 remote control, a replacement designed to operate gate automation! Gate automation requires us to have a remote control that will allow us to control the device. In this way, it is worth investing in an additional remote control, because if the original transmitter is damaged, we will have a serious problem with opening the gate. Remote SMG FAAC 868 is the perfect way to provide yourself with an additional gate controller. Which we can easily treat as a spare device in case the original remote control is damaged.

• Pilot model    SMG042
• Number of channels    2 buttons
• Remote control frequency    868.92MHz
• Coding system    variable code
• Color of the remote control     black
• Remote control power supply    27A
• Libra    40 g
• Remote control dimensions    63x40x10mm
• The degree of protection of the housing against external factors    IP 40
• Housing type    plastic
• Compatible remote controls    XT4 868 SLH XT2 868 SLH LR
• Cooperation with radio receivers    The Faac XT2 868 SLH LR and Faac XT2 868 SLH remote controls are compatible - the only difference is the increased range in the LR (Long Range) version. Faac XT2 868 SLH LR is also compatible with other Faac remote controls with 868 SLH radio (T2 868 SLH, DL2 868 SLH, TML2 868 SLH). Please do not confuse the Faac XT2 868 SLH LR (black symbol, outline around buttons and logo) with the XT2 433 SLH LR (gray symbol, outline around buttons and logo). Remote controls with different frequencies are not compatible with each other
• Working temperature: -10°C +50°C

The programming procedure for the SMG FAAC 868 replacement remote control is the same as for the original FAAC remote control. SYSTEM CODING: 

1) Press the TX master buttons A and B simultaneously and release them when the LED flashes (after approximately one second).

2) Press and hold the learn button on the decoding/RP card receiver: the LED must flash

3) When the master transmitter LED is flashing, press and hold the channel (TX LED is steady);

4) Before releasing the learn button on the decoding/RP card receiver. Check that the LED lights up steadily for a few seconds to confirm that the “place code” has been saved.

5) Release the main channel button

TX.TX CODING: 

1) Press buttons A and B on the main TX transmitter simultaneously. Used to code the system and release it when the LED starts flashing (after approximately one second).

2) Front make contact with the master TX and the TX to be encoded (master or slave)

3) On the master TX (when its LED is flashing), press and hold the same channel that is used to encode the system: the LED is steady

4) Press the required channel on the TX to be encoded and release when the LED turns off after flashing twice to confirm the "place code" has been saved;

5) Release the main TX channel button 6) Repeat this procedure for each TX that needs to be encoded.