eL1Q; sliding and garage gate controller; 24V/140W; Wiśniowski
425.00 zloty
- EUR: 97.09€
This is a controller for gate and garage drives using 24V DC motors. Perfect for continuous operation. It can be used in housing estate parking lots, private properties and companies. The following functions are used in the controller:* Control using remote controls with a dynamically variable code from Keeloq at a frequency of 433.92MHz (type; 2k433, 4k433)
- Description
- Additional information
- Mark
- Opinions (0)
Description
eL1Q; sliding and garage gate controller; 24V/140W; Wiśniowski
Driver replaced by model: eLB7Hk or eLB7H
The eL1 controller is designed for gate and garage drives using 24V DC motors with a power of up to 140W. Perfect for continuous operation. It can be used in housing estate parking lots, private properties and companies. It has numerous protections and a built-in radio receiver with a frequency of 433.92MHz. The eL1Q control panel operates in the High Security KeeLoq® mode and cooperates with transmitters from the following companies: Wiśniowski, ELBRAM, eLdrim. The controller was used in the first generation OPTIMUM 600, 800, 1100 machines. The eL1QV01/2.0.0 control panel model with modified software is used in repairs of Hormann ProMatic machines.
Basic features of eL1
- Low price
- Built-in radio receiver
- Control using KeeLoq® dynamically variable code radio transmitters
- Bell button control
- Infrared barrier
- Automatic closing function
- Earlier automatic closing of the gate after passing the infrared barrier
- G-force adjustment
- Automatic repeal after overload
- Traffic lights or switching on with delayed switching off of the lighting
- Simple installation and programming procedure
Technical data: | eL1Q | eL1H |
Power supply: | 24V ac/dc |
Operating temperature range: | -20ºC / +70ºC |
Fuse type: | 6.3 A dimensions (5×20) |
Engine power: | max. 140W |
External dimensions (width x depth x height): | 68mm x 105mm x 42.8mm without cable |
Case: | no casing |
Libra: | 110g | 110g |
Output parameters: | |
Relay outputs (type, quantity, max. load): | DC motor, one, 5.8A/24Vdc (maximum power 140W) |
Lamp relay output (type, quantity, max. load): | monostable, single, 1A/24Vac (maximum power 25W) |
Radio parameters: | |
Radio module: | integrated, superheterodyne, ensuring high reliability, repeatability and immunity to radio interference |
Transmission standard: | KeeLoq® |
Reception: | up to 200m (when using eLdrim transmitters) |
Modulation type/frequency: | OOK / 433.92MHz |
Antenna input impedance: | 50 Ω |
Antenna: | internal antenna |
Pilot memory: | 20 pcs. | 20 pcs. |
Functionality: | |
Auto-closing time: | 5s – 10mins |
Maximum controller operating time: | 120s |
Maximum lamp burning time: | 25min |
User Interface: | simple installation of the device, learning and configuration procedure, based on one LED and one button |
Transmitter configuration: | ability to assign any button to a channel |
Possibility to erase the entire memory: | Yes |
Possibility of deleting a single remote control: | NO |
Possibility to enter the remote control without having to access the receiver buttons: | NO |
Comments: | eLB7 is a replacement for eL1Q, eL7Q, optimum controllers |
Files to download:
Mark
ELDRIM
Be the first to review “eL1Q; sliding and garage gate controller; 24V/140W; "Wiśniowski" Cancel reply
also check
-
Gate control boards and control units
eLB9H – Controller for double-leaf gates 2x230V
0 out of 5- EUR: 119.70€
-
Gate control boards and control units
eLB9Ek – Controller for double-leaf gates 2x230V
0 out of 5- EUR: 123.13€
-
Gate control boards and control units
eLB11H – Controller for sliding gates 230V 800W – soft start/stop
0 out of 5- EUR: 100.29€
-
The Universal Radio Way
eL4000H-receiver 4 channels, 4000 channels, MULTI433MHz housing estates, parking lots
0 out of 5- EUR: 68.30€
Opinions
There are no opinions about the product yet.