eLB9Ek – Controller for double-leaf gates 2x230V
539,00 zloty
- Supply voltage: 230V AC
- Output voltage: 230V AC
- Built-in radio receiver: YES
- Supported gateway type: DOUBLE-LEAF GATE
- Encoder support: NO
- Description
- Additional information
- Mark
- Opinions (0)
Description
Controller eLB9 is intended for gate drives using two voltage motors/actuators 230Vac with power up to 500W. Perfect for continuous operation, it can be used on private properties and in companies. The Microchip variable transmitter coding system used makes the system inaccessible to unauthorized persons.
The eLB9 controller is available in four versions:
eLB9E works in KeeLoq® High Security mode and works only with Eldrim and Elbram remote controls
eLB9Ek works in High Security mode as above, supports additional limit switches
eLB9H works with almost all remote controls compatible with the KeeLoq coding system
eLBHk works with remote controls as above, supports additional limit switches
Basic features of eLB9:
- Soft start and stop, which increases the service life of the gate
- Control using 433MHz transmitters
- Bell button control
- Functions: AUTO CLOSING, OPEN ONLY, GATE
- Thrust force adjustment
- Working time regulation
- Release function
- Automatic recognition of limit switch type (only ..k version)
- Traffic lights
- Function to shorten the auto-closing time after detecting passage
- Photocell testing function for increased safety
- Possibility to connect an electric lock
- Input status signaling
- Remote programming of eLB9E and eLB9Ek transmitters
- Simple installation and programming procedure
|
Technical data: |
eLB9E | eLB9Ek | eLB9H | eLB9Hk |
|
Power supply: |
230Vac+10%/-15% 50Hz |
|
Power consumption at rest: |
below 3W (without accessories) |
|
Fuse type: |
5A/230V (5x20mm) |
|
Operating temperature range: |
-20ºC / +70ºC. |
|
External dimensions (width x depth x height): |
164mm x 107mm x 38mm |
|
Case: |
none (dedicated eL231 housing) |
|
Libra: |
470g | 480g | 470g | 480g |
|
Output parameters: |
|
|
Motor (type, quantity, max. load): |
induction 1-phase, 2, 2 x 0.5kW |
|
Lamp (type, quantity, max. load): |
NO, 1, 230Vac/15W – do not use fluorescent lamps |
|
Maximum load capacity of the CH2 channel: |
1A/30VDC, 0.3A/60VDC, 0.5A/125VAC |
|
Power supply for accessories (type, quantity, max. load): |
DC, 1, 24Vdc/300mA |
|
Radio parameters: |
|
|
Transmission standard: |
KeeLoq® |
|
Transmission security: |
64-bit dynamically variable code |
|
Reception: |
up to 200 m |
|
Modulation type/frequency: |
OOK / 433.92MHz |
|
Antenna input impedance: |
50 Ω. |
|
Antenna: |
internal antenna |
|
Supported remote controls: |
2k433, 4k433, 2A433, 4A433, 4E433 |
|
Pilot memory: |
32 pilots |
|
Functionality: |
|
|
Auto-closing time: |
5s – 25mins. |
|
maximum controller operating time: |
0s – 120s. |
|
maximum break time: |
10s when opening, 20s when closing |
|
User Interface: |
Simple device installation, learning and configuration procedure,
based on one LED and two buttons |
|
Transmitter configuration: |
Ability to assign any button to a channel. |
|
Possibility to erase the entire memory: |
|
|
Possibility of deleting a single remote control: |
|
|
Possibility to enter the remote control without having to access the receiver buttons: |
Files to download:
Additional information
| Index | 11564 |
|---|---|
| Producer | |
| Producent code | |
| Libra | 1 |
| Supply voltage: | 230V AC |
| Output voltage: | 230V AC |
| Built-in radio receiver: | YES |
| Supported gateway type: | Double-leaf gate |
| Encoder support: | NO |
Mark
ELDRIM
Be the first to review "eLB9Ek - Controller for double-leaf gates 2x230V"
also check
135 in stock (can be ordered)
SKU:
Out of stock
SKU:
Opinions
There are no opinions about the product yet.