SMG GENIUS Amigold Echo Kilo remote control

Description

Remote control model: SMG-042GENIUS-2

Number of channels: 2 buttons
Remote control frequency: 868.92MHz
Coding system: variable code
Remote control color: black
Remote control power supply: 27A
Libra: 40g
Remote control dimensions: 63x40x10mm
Degree of protection of the housing against external factors: IP40 
Housing type: plastic
Compatible remote controls: XT4 868 SLH XT2 868 SLH LR
Cooperation with radio receivers: The Faac XT2 868 SLH LR and Faac XT2 868 SLH remote controls are compatible - the only difference is the increased range in the LR (Long Range) version. Faac XT2 868 SLH LR is also compatible with other Faac remote controls with 868 SLH radio (T2 868 SLH, DL2 868 SLH, TML2 868 SLH). Please do not confuse the Faac XT2 868 SLH LR (black symbol, outline around buttons and logo) with the XT2 433 SLH LR (gray symbol, outline around buttons and logo). Remote controls with different frequencies are not compatible with each other
Working temperature: -10°C +50°C

The programming procedure is the same as for the original FFAC remote control. SYSTEM CODING: 

1) Press the TX master buttons A and B simultaneously and release them when the LED flashes (after approximately one second).

 2) Press and hold the learn button on the decoding/RP card receiver: the LED must flash 

3) When the master transmitter LED is flashing, press and hold the channel (TX LED is steady); 

4) Before releasing the learn button on the decoder/RP card receiver, check that the LED lights up steadily for a few seconds to confirm that the "place code" has been saved. 

5) Release the main channel button

TX.TX CODING: 

1) Simultaneously press the system coding buttons A and B on the main TX transmitter and release them when the LED starts flashing (after approximately one second). 

2) Front make contact with the master TX and the TX to be encoded (master or slave) 

3) On the master TX (when its LED is flashing), press and hold the same channel that is used to encode the system: the LED is steady

 4) Press the required channel on the TX to be encoded and release when the LED turns off after flashing twice to confirm the "place code" has been saved; 

5) Release the main TX channel button 6) Repeat this procedure for each TX that needs to be encoded.