Radio receiver eLR-824 2-channel, 96 remote controls. SOMFY RTS

Description

eLR-824 is a two-channel receiver, powered by 12 to 24V AC/DC, and equipped with memory 96 pilots. It works with SOMFY variable code remote controls 433.42 MHz. In the receiver, it is possible to program a combination of remote control buttons to the channel. A device dedicated to controlling any gate drives and more.

The product is incompatible with the Somfy IO system.

TECHNICAL DATA :

• Frequency: 433.42MHz
• Power supply: 12/24 V AC DC (12 V short JUMPER 2 PIN 1-2, 24 V short JUMPER 2 PIN 2-3)
• Number of relays: 2
• Number of programmable remote controls: 48 per relay (96 total)
• Code: Rolling code (RTS)
• Possibility to increase the radio range using an antenna
• Protection index: IP 55
• Compatibility: All Somfy RTS (Radio Technology Somfy) low voltage motors (install jumper 1, this is the curtain
• remote controls, remove jumper 1, applies to garage door remote controls)
• Operating temperature: -20°C + 70°C
• Dimensions (W x H x D): 85 x 85 x 50 mm

Programming instructions:

1. Learning transmitter codes:

Press PRG 1 or PRG 2 ​​for 2-3 seconds, the LEARN LED will illuminate, then press the button selected on
transmitter until "learn_led" flashes and goes off, the transmitter code has been saved.
Repeat the above steps for other transmitters.

2. Erasing transmitter codes:

Press "PRG 1" or "PRG 2" and hold the learn_led light until it turns off
PRG 1 to delete channel 1
PRG 2 ​​to delete channel 2

Files to download: