FAAC-CYCLO-24V/KIT sliding gate drive – STARTER KIT
4392,00 zloty
The FAAC-CYCLO-24V/KIT electromechanical drive is designed to work with sliding gates weighing no more than 800 kg. Thanks to many technological amenities, the device is safe and convenient to use.
Thanks to the built-in overload protection, if a collision between the gate and an obstacle is detected during closing, the drive will immediately stop and then open the gate. The automatic gate closing function allows you to set the time from complete opening, after which the gate will close automatically. Moreover, the drive automatically locks after completion. movement, preventing manual opening of the gate. Thanks to this, there is no need to use additional devices securing the gate against opening. In the event of a drive or power failure, it is possible to manually release the lock using a key.
The set includes: drive - model C721 with a built-in E721 controller, a set of XP20BD photocells (transmitter + receiver pair), XF868 radio communication module, XT4 radio remote control, a set of 2 limit switches and the necessary assembly accessories
- Description
- Additional information
- Mark
- Opinions (0)
Description
Composition:
The FAAC-CYCLO-24V/KIT electromechanical drive is designed to work with sliding gates weighing no more than 800 kg. Thanks to many technological amenities, the device is safe and convenient to use.
Thanks to the built-in overload protection, if a collision between the gate and an obstacle is detected during closing, the drive will immediately stop and then open the gate. The automatic gate closing function allows you to set the time from complete opening, after which the gate will close automatically. Moreover, the drive automatically locks after completion. movement, preventing manual opening of the gate. Thanks to this, there is no need to use additional devices securing the gate against opening. In the event of a drive or power failure, it is possible to manually release the lock using a key.
The set includes: drive - model C721 with a built-in E721 controller, a set of XP20BD photocells (transmitter + receiver pair), XF868 radio communication module, XT4 radio remote control, a set of 2 limit switches and the necessary assembly accessories
Dosage:
Gate drive type: | Mechanical, For sliding gates - Starter pack |
Torque: | 30 Nm (max) |
Maximum thrust: | 530 N |
Engine type: | Brush motor, 24V DC |
Maximum gate weight: | 800 kg |
Maximum gate length: | 15 m |
Linear speed: | 18 m/min (max) |
Automatic gate closing: | |
Automatic drive locking: | |
Limit switch: | |
Possibility to connect a photocell: | |
Possibility to connect a signal lamp: | |
Maximum number of programmed remote controls: | 250 Channels |
Wireless transmission range: | ≥ 50 m (in open area) |
System operating frequency band : | 868.35MHz |
Selected features: |
|
Power supply: | 230V AC / 50Hz |
Case: | Plastic |
Tightness class: | IP44 |
Color: | Gray |
Working temperature: | -20 °C … 55 °C |
Libra: | 8.32 kg |
Dimensions: | 304 x 282 x 180 mm |
Manufacturer / Brand: | FAAC |
Guarantee: | 2 years |
Additional information
Libra | 12.03 kg |
---|---|
Libra | |
Length | 380 |
Width | 375 |
Height | 345 |
EAN | |
Producer |
Opinions
There are no opinions about the product yet.