Wiśniowski gate controller 24V 140W eLB7Hk2

Description

eLB7Hk2 – Gate controller 24V 140W

Gate controller 24V 140W eLB7Hk2 is an innovative device designed to ensure reliability and functionality in gate automation systems. Thanks to advanced technology and solid construction, the eLB7Hk2 controller is perfect for both home and commercial installations. This is a controller for gate and garage drives using 24V DC motors with a power of up to 140W.

It has a multi-core plug for direct connection connect controller for the ST-1, eL01a or eL01 connection board. Perfect for continuous operation. It can be used in housing estate parking lots, private properties and companies. The eLB7Qk controller is eagerly used as a replacement for the ST1 or ST2 controller from Wiśniowski.

The drivers are available in four versions:

• eLB7Qk operating in KeeLoq® High Security mode with a beam length of 100 mm
• eLB7Qk2 operating in KeeLoq® High Security mode with a beam length of 290 mm
• eLB7Hk with a beam length of 100 mm, works with almost all remote controls compatible with the KeeLoq® coding system
• eLB7Hk2 with a beam length of 290 mm, works with almost all remote controls compatible with the KeeLoq® coding system

Basic features of eLB7k

• Soft start and stop to increase the life of the gate
• Built-in radio receiver for the controller to support remote controls
• Control using transmitters (up to 34) at 433.92MHz with KeeLoq® dynamically variable code to increase the remote control's operating range
• Remote programming of remote controls to facilitate coding of remote controls
• Bell button control
• Neighborhood function
• Wicket function
• Infrared barrier to protect the gate against accidental closing
• Automatic closing function
• Earlier automatic closing of the gate after passing the infrared barrier to save electricity
• Adjustment of static and dynamic overload force
• Automatic repeal after overload
• Traffic lights or switching on with delayed switching off of the lighting
• Simple installation and programming procedure

Technical data:

• eLB7Qk | eLB7Qk2 | eLB7Hk | eLB7Hk2
• Power supply: 24V ac/dc
• Operating temperature range: -20ºC / +70ºC
• Fuse type: 6.3 A dimensions (5×20)
• Engine power: max. 140W
• External dimensions (width x depth x height): 84.8mm x 154.4mm x 42.8mm without cable
• Housing: splash-proof plastic housing IP40
• Weight: 250g | 270g | 250g | 270g

Output parameters:    

• Relay outputs (type, number, max. load): DC motor, one, 5.8A/24Vdc (maximum power 140W)
• Lamp relay output (type, quantity, max. load): monostable, one, 1A/24Vac (maximum power 25W)

Radio parameters:  

• Radio module: integrated, superheterodyne to ensure high reliability, repeatability and resistance to radio interference
• Transmission standard: KeeLoq®
• Range: up to 200m (when using eLdrim transmitters)
• Modulation type / frequency: OOK / 433.92MHz
• Antenna input impedance: 50 Ω
• Antenna: internal antenna, terminals for connecting an external antenna on eL01a to extend the range of the remote control
• Remote control memory: 34 pcs. | 34 pcs. | 48 pcs. | 48 pcs.

Functionality:    

• Auto-closing time: 5s – 10min
• Maximum controller operating time: 120s
• Maximum lamp lighting time: 25 minutes
• User interface: simple device installation, learning and configuration procedure, based on one LED and one button to facilitate controller setting
• Transmitter configuration: ability to assign any button to a channel so that various functions can be assigned to the remote control
• Ability to erase entire memory: yes
• Possibility of deleting a single remote control: no
• Possibility to enter the remote control without having to access the receiver's buttons: yes | yes | no | NO
• Notes: In the case of installation, it is required to connect photocells, if there are no photocells, install a jumper on the eL01a connection board. eLB7Qk is compatible with the ST1 connection board. In case of installation in place of the ST2 controller, it is REQUIRED to change the switching board to eL01a and change the configuration of the limit switches to NO

Why is it worth choosing the eLB7Hk2 controller?

The eLB7Hk2 gate controller is an excellent choice for people looking for efficient, safe and durable solutions in the field of gate automation. Its modern functions and solid construction guarantee long-term, trouble-free operation, making it an ideal solution for both private users and companies.

Order now and enjoy reliable control of your gate!

Files to download:

Additional information

Mark

ELDRIM

Eldrim is a dynamic company specializing in the production of innovative gate automation solutions. Thanks to many years of experience and commitment to technological development, Eldrim offers customers high-quality gate drives, remote controls and other accessories, ensuring not only safety, but also convenience and comfort of use. Eldrim is a partner you can rely on, caring for its customers' satisfaction and striving to constantly improve its products.