8
mar
How to program the FAAC FIX remote control
Entering a new remote control FAAC FIX
To program a new FAAC FIX remote control: Remove jumper J1 (red jumper), press and hold the LEARN button (small red switch). Put on the jumper (while keeping the LEARN button pressed). After the LED lights up, release the LEARN button and press the remote control button that will be used to operate channel "1". When the radio receives a signal from the remote control, the LED will turn off, then press the same button on the remote control again. If the radio registers the remote control, the LED will light up for 1 second (flashing). Go to point 2. *If you do not want to program the button for channel "2", remove and reinstall jumper J1. Finish programming this way or just press the LEARN button and enter subsequent remote controls in the same way. At the end of programming all remote controls, always remember to remove the jumper (jumper J1) for a moment and put it on.
After correctly entering channel "1":
Press (1 time) the second button on the same remote control (the one that will be used to operate channel "2", the LED will light up for 1 second (blink). Remove and re-attach jumper J1 to finish programming or press the LEARN button and in the same way to enter subsequent remote controls. At the end of programming, remove and install the jumper (jumper J1). If we want to use only channel "2" for a given remote control, the same remote control button should be used to register channels "1" and "2", then on the selected one. the remote control button will only respond to channel "2"
Erasing remote controls
Remove the J1 jumper, press and hold the LEARN button while holding the LEARN button, put on the J1 jumper and keep holding the LEARN button (approx. 10 seconds) until the LED-K1 goes off, release the LEARN button.
Remote controls compatible with FAC FIX radio
An automatically closing entrance gate means not only comfort and time savings, but also a high level of security. To fully exploit the potential of gate automation, it is worth choosing high-quality ones FAAC gate remote control.
Our proposals include FAAC remote controls:
Thanks to this, regardless of the type of gate drive, every user will find a product that fully meets their expectations. FAAC gate remote controls, thanks to many personalization options, guarantee protection against possible signal interception (theft). Easy operation of all functions, including the ability to make changes, is important for users.
For current and future users, we have prepared an operating manual that is worth reading (you can print it). Of course, programming is intuitive. Everyone FAAC gate remote control from our catalog is distinguished by the highest quality of workmanship and aesthetics. Compact dimensions are also important for the user, allowing you to hide the gate remote control in your pocket or briefcase.
Security includes dynamic variable coding systems, which are equipped with each of the transmitters offered in our store. Comfort means pleasant-to-touch material, clear keys and ergonomic shape. Quality means electronic components that are resistant to years of use, even in unfavorable weather conditions. It is worth adding that our proposals are addressed not only to private property owners. But they can also be used, after prior programming, in the case of housing estate gates.
Obviously, all FAAC gate remote controls from our store have appropriate certificates. Confirming high quality and compliance with Polish and European standards. Manufacturer's warranty protection is also standard. We encourage you to read the details of the offer and place an order.
To facilitate the selection, each of our products has been adequately described. (there are dimensions, operating frequency, weight, degree of housing protection, type of power supply, number of channels, operating temperature).
Share:
